Skip to content

Bigbluebutton Installation Ubuntu

조회 수 9012 추천 수 0 2013.04.11 15:33:13

Before you install

These instructions require you install BigBlueButton 0.80 on a Ubuntu 10.04 32-bit or 64-bit server (or desktop). We've not tested the installation on earlier or later versions of Ubuntu.

You can verify you have Ubuntu 10.04 with the command cat /etc/lsb-release. You should see DISTRIB_RELEASE=10.04.

$ cat /etc/lsb-release 
DISTRIB_ID
=Ubuntu 
DISTRIB_RELEASE
=10.04 
DISTRIB_CODENAME
=lucid 
DISTRIB_DESCRIPTION
="Ubuntu 10.04.4 LTS"

We recommend installing BigBlueButton on a dedicated (non-virtual) server for optimal performance. To install BigBlueButton, you'll need root access to a Ubuntu 10.04 server with

  1. 4 GB (or more of memory)
  2. quad-core 2.6 GHZ CPU (or faster)
  3. Ports 80, 1935, 9123 accessible
  4. Port 80 is not used by another application
  5. 500G of free disk space (or more) for recordings
  6. Minimum of 100 MBits/sec bandwidth

To understand why you need to check that port 80 is not in use, see we recommend running BigBlueButton on port 80.

In addition to the above, the locale of the server must be en_US.UTF-8. You can verify this by

$ cat /etc/default/locale 
LANG
="en_US.UTF-8"

If you don't see LANG="en_US.UTF-8", then do the following

sudo apt-get install language-pack-en 
sudo update
-locale LANG=en_US.UTF-8

and the logout and log back into your session. After the above, do cat /etc/default/locale again and verify you see LANG="en_US.UTF-8".

Next, verify that port 80 is not in use by another application. To verify, do

   sudo apt-get install lsof 
   lsof
-i :80

Upgrading from BigBlueButton 0.80 beta/RC

If you are upgrading from an earlier BigBlueButton 0.80 beta/release candidate, please note, if you've made custom changes to BigBlueButton, such as

  • applied custom branding
  • modified /var/www/bigbluebutton/client/conf/config.xml
  • modified /var/www/bigbluebutton-default/index.html
  • modified API demos
  • modified settings to FreeSWITCH configurations
  • etc ...

then you'll need to backup your changes before doing the following upgrade, after which you can reapply the changes.

To do the following

   sudo apt-get update 
   sudo apt
-get dist-upgrade

At some point in the process you may be asked to update configuration files, as in

  Configuration file `/etc/nginx/sites-available/bigbluebutton'  
   ==> Modified (by you or by a script) since installation.  
   ==> Package distributor has shipped an updated version.  
     What would you like to do about it ?  Your options are:  
      Y or I  : install the package maintainer's version  
      N or O  : keep your currently-installed version  
        D     : show the differences between the versions  
        Z     : background this process to examine the situation  
   The default action is to keep your current version.  
  *** bigbluebutton (Y/I/N/O/D/Z) [default=N] ?

Enter 'Y' each time continue the upgrade. After BigBlueButton updates, restart all the processes

After the install finishes, restart your BigBlueButton server with

   sudo bbb-conf --clean  
   sudo bbb
-conf --check

Upgrading from BigBlueButton 0.71a

If you are upgrading from BigBlueButton 0.71a, start here.

Installation of BigBlueButton 0.80

Install Video

To make it easy for you to setup your own BigBlueButton 0.80 server, we've put together the following overview video.

We recommend you following the video with these step-by-step instructions below.

1. Update your server

You first need to give your server access to the BigBlueButton package repository for 0.8.

In a terminal window, copy and paste the following commands.

# Add the BigBlueButton key 
wget http
://ubuntu.bigbluebutton.org/bigbluebutton.asc -O- | sudo apt-key add - 
 
# Add the BigBlueButton repository URL and ensure the multiverse is enabled 
echo
"deb http://ubuntu.bigbluebutton.org/lucid_dev_08/ bigbluebutton-lucid main" | sudo tee /etc/apt/sources.list.d/bigbluebutton.list 
echo
"deb http://us.archive.ubuntu.com/ubuntu/ lucid multiverse" | sudo tee -a /etc/apt/sources.list

After you've made the above changes, do a dist-upgrade to ensure your running the latest packages and your server is up-to-date before installing BigBlueButton.

sudo apt-get update 
sudo apt
-get dist-upgrade

If you've not updated in a while, apt-get may recommend you reboot your server after dist-upgrade finishes. Do the reboot before proceeding to the next step.

2. Install Ruby

The record and playback infrastructure uses Ruby for the processing of recorded sessions.

First, check if you have any previous versions of ruby installed.

  dpkg -l | grep ruby

If you do, the version must match 1.9.2p290.

$ ruby -
ruby
1.9.2p290 (2011-07-09 revision 32553)

If not, you must install the older version of before proceeding further.

To install ruby, first install the following dependencies.

sudo apt-get install zlib1g-dev libssl-dev libreadline5-dev libyaml-dev build-essential bison checkinstall libffi5 gcc checkinstall libreadline5 libyaml-0-2

Next, create a file called install-ruby.sh and copy and paste in the following script.

#!/bin/bash 
cd
/tmp 
wget http
://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.2-p290.tar.gz 
tar xvzf ruby
-1.9.2-p290.tar.gz 
cd ruby
-1.9.2-p290 
./configure --prefix=/usr\ 
            --program-suffix=1.9.2\ 
            --with-ruby-version=1.9.2\ 
            --disable-install-doc 
make 
sudo checkinstall -D -y\ 
                  --fstrans=no\ 
                  --nodoc\ 
                  --pkgname='ruby1.9.2'\ 
                  --pkgversion='1.9.2-p290'\ 
                  --provides='ruby'\ 
                  --requires='libc6,libffi5,libgdbm3,libncurses5,libreadline5,openssl,libyaml-0-2,zlib1g'\ 
                  --maintainer=brendan.ribera@gmail.com 
sudo update-alternatives --install /
usr/bin/ruby ruby /usr/bin/ruby1.9.2 500 \ 
                         
--slave /usr/bin/ri ri /usr/bin/ri1.9.2 \ 
                         
--slave /usr/bin/irb irb /usr/bin/irb1.9.2 \ 
                         
--slave /usr/bin/erb erb /usr/bin/erb1.9.2 \ 
                         
--slave /usr/bin/rdoc rdoc /usr/bin/rdoc1.9.2 
sudo update
-alternatives --install /usr/bin/gem gem /usr/bin/gem1.9.2 500

Next, run the script

chmod +x install-ruby.sh 
./install-ruby.sh

After the install finishes, type ruby -v. You should see the ruby interpreter output 1.9.2p290 (or later).

$ ruby -
ruby
1.9.2p290 (2011-07-09 revision 32553)

Next type gem -v.

$ gem -
1.3.7

Finally, to make sure you can install gems, type sudo gem install hello (BigBlueButton does not need the gem hello; rather, we're just testing to makes sure gem is working properly).

$ sudo gem install hello 
Successfully installed hello-0.0.1 
1 gem installed 
Installing ri documentation for hello-0.0.1... 
Installing RDoc documentation for hello-0.0.1...

Make sure you can execute the above three commands without errors before continuing with these instructions. If you do encounter errors, please post to bigbluebutton-setup and we'll help you resolve the errors.

You might be wondering why not use the default Ruby packages for Ubumtu 10.04? Unfortunately, they are out of date. Thanks to Brendan Ribera for the above script for installing the latest ruby on Ubuntu 10.04 as a package.

3. Install BigBlueButton

We're now ready to install BigblueButton. Type

   sudo apt-get install bigbluebutton

This single command is where all the magic happens. This command installs all of BigBlueButton components with their dependencies. Here's a screen shot of the packages it will install.

Type 'y' and press Enter. The packaging will do all the work for you to install and configure your BigBlueButton server.

If you are behind a HTTP Proxy, you will get an error from the package bbb-record-core. You can resolve this by manually installing the gems.

4. Install API Demos

To interactively test your BigBlueButton server, you can install a set of API demos.

   sudo apt-get install bbb-demo

You'll need the bbb-demo package installed if you want to join the Demo Meeting from your BigBlueButton server's welcome page. This is the same welcome page you see at our demo server.

Later on, if you wish to remove the API demos, you can enter the command

   sudo apt-get purge bbb-demo

5. Do a Clean Restart

To ensure BigBlueButton has started cleanly, enter the following commands:

   sudo bbb-conf --clean 
   sudo bbb
-conf --check

The --clean option will clear out all the log files for BigBlueButton. The --check option will grep through the log files looking for errors.

The output from sudo bbb-conf --check will display your current settings and, after the text, " Potential problems described below ", print any potential configuration or startup problems it has detected.

Got to Trying out your sever.

Upgrading a BigBlueButton 0.71a Server

The following steps will upgrade a standard installation of BigBlueButton 0.71a to 0.8.

A 'standard installation' is an installation of BigBlueButton 0.71a that has been configured using the standard commands

   sudo bbb-conf --setip <ip/hostname> 
   sudo bbb
-conf --setsalt <salt>

If you've made custom changes to BigBlueButton 0.71a, such as

  • applied custom branding
  • modified /var/www/bigbluebutton/client/conf/config.xml
  • modified /var/www/bigbluebutton-default/index.html
  • modified API demos
  • etc ...

then you'll need to backup your changes before doing the following upgrade, after which you can reapply the changes.

1. Update your server

First, let's update all the current packages on your server (including the kernel) to ensure your starting with an up-to-date system.

sudo apt-get update 
sudo apt
-get dist-upgrade

If you've not updated in a while, apt-get may recommend you reboot your server after dist-upgrade finishes. Do the reboot before proceeding to the next step.

2. Install Ruby

Follow the instructions here.

3. Remove FreeSWITCH 1.0.6

This step will uninstall FreeSWITCH 1.0.6.

BigBlueButton 0.80 requires FreeSWITCH 1.0.7 for recording of sessions. In later steps, the BigBlueButton 0.80 will install and configure FreeSWITCH 1.0.7.

Before upgrading, first remove the older FreeSWITCH packages.

sudo apt-get purge freeswitch freeswitch-sounds-en-us-callie-16000 freeswitch-sounds-en-us-callie-8000 freeswitch-sounds-music-16000

Check to ensure that there are no remaining FreeSWITCH packages.

   dpkg -l | grep freesw

If there are any remaining packages, such as freeswitch-lang-en, then purge those as well

   sudo apt-get purge freeswitch-lang-en

4. Upgrade BigBlueButton

First, update the BigBlueButton repository URL to the beta repository.

echo "deb http://ubuntu.bigbluebutton.org/lucid_dev_08/ bigbluebutton-lucid main" | sudo tee /etc/apt/sources.list.d/bigbluebutton.list

Next, update the local packages. This will make apt-get aware of the newer packages for BigBlueButton 0.8.

sudo apt-get update

The following command will upgrade your packages to the latest beta.

sudo apt-get dist-upgrade

After a few moments you'll be prompted whether you want to overwrite /etc/nginx/sites-available/bigbluebutton.

Configuration file `/etc/nginx/sites-available/bigbluebutton' 
 ==> Modified (by you or by a script) since installation. 
 ==> Package distributor has shipped an updated version. 
   What would you like to do about it ?  Your options are: 
    Y or I  : install the package maintainer's version 
    N or O  : keep your currently-installed version 
      D     : show the differences between the versions 
      Z     : background this process to examine the situation 
 The default action is to keep your current version. 
*** bigbluebutton (Y/I/N/O/D/Z) [default=N] ?

Type 'y' and hit Enter.

5. Install FreeSWITCH Configuration and API demos

Now let's install and configure FreeSWITCH 1.0.7.

sudo apt-get install bbb-freeswitch-config

Install the API demos to interactively try BigBlueButton.

sudo apt-get install bbb-demo

6. Remove unneeded packages

We no longer need activmq, so let's remove it. The command sudo apt-get autoremove will remove all remaining packages that have no reference.

sudo apt-get purge activemq 
sudo apt
-get autoremove

7. Do a clean restart

Let's do the standard clean restart and then check the system for any potential problems.

sudo bbb-conf --clean 
sudo bbb
-conf --check

Trying out your server (24:42 minutes later)

You've got a full BigBlueButton server up and running (don't you just love the power of Ubuntu/Debian packages). Open a web browser to the URL of your server. You should see the BigBlueButton welcome screen.

To start using your BigBlueButton server, enter your name and click the 'Join' button. You'll join the Demo Meeting.

If this is your first time using BigBlueButton, take a moment and watch these overview videos.

To record a session, click 'API Demos' on the welcome page and choose 'Record'. Start a meeting and upload slides. When you are done, click 'Logout' and return to the 'API Demos' and the record demo. Wait a few moments and refresh your browser, you should see your recording appear.

Click 'Slides' to playback the slides, audio, and chat of the recording.

The following YouTube Video will walk you through using record and playback. In almost all cases, you'll use BigBlueButon through a 3rd party integration (see below).

URL and salt for 3rd party integrations

If you want to use BigBlueButton with a 3rd party integration, you can get the URL and security salt from your server using the command bbb-conf --salt.

$ bbb-conf --salt 
 
       URL
: http://192.168.0.36/bigbluebutton/ 
     
Salt: b22e37979cf3587dd616fa0a4e6228

 

출처 : http://code.google.com/p/bigbluebutton/wiki/InstallationUbuntu#Before_you_install

profile

일요일은 짜빠게뤼~ 먹는날~^^

엮인글 :
http://adminplay.com/193407/84a/trackback
List of Articles
번호 제목 글쓴이 날짜 조회 수
307 [ UDP ] packet buffer size 조절 ADMINPLAY 2013-04-25 7027
306 리눅스 메모리 관리, 왜 메모리 여유공간이 없을까? (top ... ADMINPLAY 2013-04-25 5301
305 sysctl 조정 방법 ADMINPLAY 2013-04-25 7290
304 웹 언어별 no-cache 리스트 ADMINPLAY 2013-04-22 6705
303 ubuntu 부팅시 서비스 자동실행 및 실행방지 ADMINPLAY 2013-04-16 7945
302 Installing NGINX, PHP, and MySQL on Ubuntu 10.04 LTS u... ADMINPLAY 2013-04-11 6105
» Bigbluebutton Installation Ubuntu ADMINPLAY 2013-04-11 9012
300 dpkg 사용법 ADMINPLAY 2013-04-03 5012
299 [Ubuntu] 부팅시 시작되는 데몬 관리하기 – update-rc.d ADMINPLAY 2013-03-05 33326
298 ubuntu 10.04 에서 Nginx, Mysql, PHP5 ADMINPLAY 2013-02-28 5241
297 우분투(Ubuntu) ssh 설정하기 ADMINPLAY 2013-02-27 5666
296 proxy 서버 통해서 외부문서 불러오기 curl ADMINPLAY 2013-02-20 8153
295 운영중인 Linux 서버에서 NTFS 파일 시스템 삭제하기 ADMINPLAY 2013-01-16 5737
294 Sample rate(샘플레이트)와 Bit rate (비트레이트) ADMINPLAY 2012-12-28 9770
293 도메인 Status 상태별 설명 안내 ADMINPLAY 2012-12-28 4898
292 sakai 2.7.0 source installation in ubuntu 10.04.1 file ADMINPLAY 2012-10-31 7941
291 Ubunt (우분투) 에서 sun-java6-jdk 설치 ADMINPLAY 2012-10-30 7179
290 Unbunt OS 에서 Maven 설치(Install it – apt-get install) ADMINPLAY 2012-10-30 7297
289 우분투 DNS 변경 및 고정 ADMINPLAY 2012-10-30 7179
288 우분투 네트웍크 설정 ADMINPLAY 2012-10-30 6795

Copyright ADMINPLAY corp. All rights reserved.

abcXYZ, 세종대왕,1234

abcXYZ, 세종대왕,1234